Evercoat Lite Weight® Lightweight Filler Plus Hardener, 100156

Product Overview:

Evercoat Lite Weight® Lightweight Filler Plus Hardener (100156) is the #1 selling, high-quality, clog-free, lightweight body filler. It is a great value with its smooth spreading and easy sanding features.

The non-clog formula adds greater value in sandpaper savings. 

For best results, apply a premium Evercoat polyester putty such as Evercoat Z-GRIP® Glaze OPTEX® Putty or Evercoat METAL GLAZE® Ultra Polyester, sold separately, to provide a smoother finish and reduce the amount of primer surfacer needed for a quality final finish. 

Available in 1 gallon size container containing 0.8 gallons (3L) of product, blue cream hardener included.

Features and Benefits:

• Clog-Free Formula: Specifically engineered to prevent the "gumming up" of sandpaper, which is a common issue with standard fillers
• Smooth Spreading: Has a creamy consistency that allows for thin, even application with minimal effort and reduced air bubbles (pinholes)
• Rapid Cure Time: Ready to sand in 10–15 minutes at room temperature, ~72°F (22°C) / 75% RH
• Multi-Substrate Adhesion: Approved for use on cold rolled steel, galvanized steel, aluminum, SMC (Sheet Molded Compound), Fiberglass and OEM paint surfaces

• Non-Sag Formula: Designed to stay in place on vertical surfaces without running or dripping.

Recommended Substrates:

• Approved substrates:
  • Cold Rolled Steel
    
  • Galvanized steel
  • Aluminum
  • SMC
  • Fiberglass
    
• Note: for structural repair areas prone to high degrees of stress and flexibility, use a fiber reinforced filler such as Everglass®, Kitty Hair®, or Fiber Tech®

Tech Specs:

• Appearance: Gray colored paste
• VOC: Refer to Section 9 of the Safety Data Sheet 
• Relative Density: Refer to Section 9 of the Safety Data Sheet
  
• Sand Time: 10-15 minutes
• Max. Recommended Thickness (sanded): 1/4 inch (6mm)
• Note: Properties are typical values and should not be considered as sales specifications. Physical testing performed @ ~72°F (22°C) / 75% RH unless otherwise noted
• Tech Data Sheet: Click here
  
• Safety Data Sheet: Click here 
  

Safety:

• Read all directions and warnings prior to using Evercoat® products. Safety Data Sheets can be found online at www.evercoat.com
• Never return mixed filler to can.
• Keep the can closed and store in a cool dry place.
• Use with Evercoat® Cream Hardener Only!
• Click here for Safety Data Sheet

** This item is considered a Hazardous Materials (HAZMAT) and must be handled in accordance with all applicable federal, state, and international regulations. Item ships UPS Ground ONLY**