Evercoat Z-Grip Glaze OPTEX Putty, 30 Once Plus Hardener, 100567

Product Overview:

Evercoat Z-GRIP® Glaze OPTEX® Putty, 30 Once (100567) is a two-part, flowable, polyester finishing putty ideally suited for filling and skim coating body work, pinholes, grind marks, low spots and other surface imperfections with patented OPTEX® color-change technology. Can also be used to fill minor body damage up to 1/8” (3 mm) in depth.

Formulated for superior adhesion to galvanized steel and aluminum with no shrinkage. May also be used on sanded body filler, steel, fiberglass, most rigid to semi-rigid plastics, and sanded OEM paint.

Available in 30 fluid ounce size bottle, includes hardener.

Features and Benefits:

• OPTEX® Color-Changing Technology, applies pink and dries green
• Flowable and easy to use
• Ideally suited for filling and skim coating body work, pinholes, grind marks, low spots and other surface imperfections
• Superior adhesion to galvanized steel and aluminum
• Easy sanding
• No shrinkage

Video:

Recommended Substrates:

• Approved substrates:
  • Sanded Body Filler
  • Steel
  • Fiberglass
  • Aluminum
  • Galvanized Steel
  • Most Rigid to Semi-Rigid Plastics
  • Sanded OEM Paint
• NOTE: For flexible plastics, use POLY-FLEX™ Flexible Glazing Putty

Mixing:

• Place the desired amount of material on a clean, non-fibrous surface. Knead 
  the cream hardener before use
• Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle)
• Puddles larger than 4” (10 cm) in diameter will require additional hardener
• Mix thoroughly until a uniform color is achieved
• Approximate setting time is 4-5 minutes @ 72°F (22°C)

Tech Specs:

• Appearance: Pink thixotropic liquid
• VOC: Refer to Section 9 of the Safety Data Sheet 
• Relative Density: Refer to Section 9 of the Safety Data Sheet
• Setting Time: 4-5 minutes
• Sand Time: 15-18 minutes
• Max. Recommended Thickness (sanded): 1/8 inch (3mm)
• Note: Properties are typical values and should not be considered as sales specifications. Physical testing performed @ ~72°F (22°C) / 75% RH unless otherwise noted
• Tech Data Sheet: Click here
• SDS: Click here

Safety:

• Read all directions and warnings prior to using Evercoat® products. Safety Data Sheets can be found online at www.evercoat.com
• Never return mixed filler to can.
• Keep the container closed and store in a cool dry place.
• Use with Evercoat® Cream Hardener Only!
• Click here for Safety Data Sheet